- 1. Simultaneous Submission
- (amecj-categories)
- Authors have an obligation to make sure their paper is based on original–never before published–research. Intentionally, submitting or re-submitting work for duplicate publication is considered a breach ...
- Created on 30 June 2018
- 2. Editing
- (Services)
- ... toward that purpose. Technical editing is a collaborative process with authors, who are often subject-matter experts (SMEs, pronounced), to check correctness of such things as chemical formulas, specialized ...
- Created on 23 October 2021
- 3. English Grammatical Tips for Writing Scientific Papers
- (Books)
- ... Paper and Select the Subject of a Thesis Purpose of Writing a Scientific Paper How to write a research paper A Guideline of Writing a Review Paper (or a Review Article) Reasons of Rejection of Papers ...
- Created on 23 October 2021
- 4. Contact us
- (amecj-categories)
- ... This email address is being protected from spambots. You need JavaScript enabled to view it. -------------------------------------------------------------------------------------------------------------------------- Contact the Journal: Queries about submission and pre-submission, ...
- Created on 05 December 2020
- 5. Fee and Funding
- (amecj-categories)
- No Fee is required for publishing articles in AMEC Journal. To publish open access in AMEC Journal, the article submission, review and publish processing has no charge.
- Created on 28 November 2020
- 6. Journal Information and Address
- (About Amecj)
- ... in AMEC Journal, the article submission, review, and publishing processing is free of charge (No Fee). Address Iran: Madadkaran Alley, Farjam St., Shahnazari Ave, Mirdamad, Tehran, Iran Address Canada: ...
- Created on 27 June 2020
- 7. Journal Ethical Rule
- (About Amecj)
- ... plagiarism detection software to screen the submissions for similarities. The peer review process in AMEC Journal is a double-blind (double-anonymised) process. (COPE: https://doi.org/10.24318/cope.2019.1.9) ...
- Created on 24 June 2020
- 8. Guide to Short Communication
- (amecj-categories)
- ... not subdivided. The paper should contain an abstract, main body, acknowledgment (if there is) and references, and contain no more than 6 figures or tables, combined. Moreover, the abstract is limited to ...
- Created on 05 October 2019
- 9. Guide of Review Paper
- (amecj-categories)
- ... can be submitted. Aim of review article To evaluate literature To identify patterns and trends in teh literature To synthesize literature To identify research gaps and recommend new research ...
- Created on 12 March 2019
- 10. Terms of use
- (amecj-categories)
- Analytical Methods in Environmental Chemistry Journal is available for all the authors and Researchers for reading, Download the articles and use them under the copyright law. The journal Does NOT have ...
- Created on 30 January 2019
- 11. PEER REVIEW
- (amecj-categories)
- Manuscript Submission and Pre-Review The online submission system guides you stepwise through entering TEMPyou're article files by uploading them. The system converts TEMPyou're article files to a single ...
- Created on 13 January 2019
- 12. GUIDE FOR REVIEWER
- (amecj-categories)
- ... deliver TEMPTEMPTEMPyou're review, click on teh link in teh invitation email you received, which will bring you to teh submission/reviewing system. 4- Teh first time, check teh methods section. Teh following ...
- Created on 13 January 2019
- 13. Occupational Exposure to Mercury: Air Exposure Assessment and Biological Monitoring based on Dispersive Ionic Liquid- Liquid Microextraction
- (Papers)
- ... in Iran by determining of Hg concentrations in air, blood and urine samples. Methods: The study was performed on 50 exposed subjects and 50 unexposed controls. Air samples were collected in the breathing ...
- Created on 08 October 2018
- 14. Nobel Method for Toluene Removal from Air Based on Ionic Liquid Modified Nano-Graphen
- (Papers)
- ... chromatography equipped with flame ionization detector (GC-FID) were used. Graphene ultrahigh-quality synthesized by substrate-free gas-phase method in a single step and graphene sheets were deposited ...
- Created on 08 October 2018
- 15. Graphene oxide-packed micro-column solid-phase extraction combined with flame atomic absorption spectrometry for determination of lead (II) and nickel (II) in water samples
- (Papers)
- ... captionColor="#a0a0a0"] Based on the preliminary experiments, the retention of Pb (II) and Ni (II) ions on a GO-packed micro-column was chosen for preconcentration of the metal ions and their subsequent ...
- Created on 08 October 2018
- 16. Solid Phase Equation of State Application for Wax Formation Prediction in Petroleum Mixtures
- (Papers)
- ... In this work, solid phase behavior is predicted by a solid equation of state. At first, by using the thermodynamic method (subcoled liquid) for pure solid phase fugacity from pure liquid fugacity, the ...
- Created on 08 October 2018
- 17. Ultra-trace arsenic and mercury speciation and determination in blood samples
- (Papers)
- ... acid solution. Finally, As(V) and R—Hg were determined by mathematically subtracting the As(III) and Hg(II) content from the total arsenic and mercury, respectively. Under optimum conditions, linear range ...
- Created on 08 October 2018
- 18. Ultra-trace Arsenic Determination in Urine and Whole Blood Samples
- (Papers)
- ... by reducing As (V) to As (III) with potassium iodide (KI) and ascorbic acid in HCl solution and then, As (V) was calculated by the subtracting the total arsenic and As (III) content. Under the optimum ...
- Created on 08 October 2018
- 19. Advisory Board
- (amecj-categories)
- ... subjects Phone: - | Fax: - | Email Address: This email address is being protected from spambots. You need JavaScript enabled to view it. Dr. Majid Abdous Associated Professor, ...
- Created on 06 October 2018
- 20. GUIDE FOR AUTHORS
- (amecj-categories)
- ... food chemistry. AMEC journal publishes original and review papers. their is no charge for submitting, reviewing, and publishing articles in the AMECJ (No Fee). AMECJ publishes open-access articles under ...
- Created on 01 July 2018
Recent Articles
-
A review: Exploratory analysis of recent advancement in green analytical chemistry application
30/03/2024It is always a concern to ensure personnel and environment safety in the field of chemistry which has caused to development of green analytical chemistry methods. Green chemistry aims to create an eco-friendly environment in laboratories by using various analytical methods/strategies to reduce the use of toxic solvents which are harmful to humans and the environment. It is a way that protect the environment by using green solvents and methods. Green analytical chemistry is a rapid analytical technique that describes the separation, identification, and quantification of an analyte in
... -
the Determination and evaluation of trace elements in the blood of radiography workers using graphite furnace atomic absorption spectrometry
30/03/2024This study aimed to evaluate the potentially toxic effects of trace elements in the blood of Iraqi medical radiography workers by analyzing them through GF-AAS. The study involved 50 male blood radiography workers from the medical imaging field at Al-Shatrah General Hospital in Thi-Qar City, Iraq. All workers were aged between 35-50 years and had worked for less than 10 years. The study compared these workers with 50 healthy men. The study found a significant increase in the levels of Cu, Pb, Cd, and Ca among radiography workers compared to the healthy control group, while Zn and Se
... -
Analytical Method: Determination of famotidine drug using chemiluminescence method
28/03/2024This study involved the development of a novel, cost-effective, fast, and highly sensitive analytical technique for quantifying minimal amounts of the drug famotidine through chemiluminescence. The method is centred around the measurement of energy emitted as a result of the interaction between the drug and Luminol in an alkaline solution; this interaction generates an electronically excited intermediate state, releasing a portion of the system’s energy as photons. The method was sensitive for the analysis of famotidine. The linear calibration curve (LR) is obtained in the range 2-12 mg
... -
Solid phase-fabrication of multi-walled carbon nanotubes and their derivatives for efficient extraction and analysis of Bismarck Brown-Y Dye from aque...
29/03/2024This investigation used efficientMWCNTs and their derivatives; MWCNT-Tris, MWCNT-H, MWCNT-Tetra and MWCNT-G, for extraction and removing the Bismarck Brown-Y (BB-Y) by solid phase extraction (SPE). The concentration of BB-Y was measured by UV-Vis spectrophotometer after the SPE technique. The solid phases were analyzed and characterized by utilizing several techniques, including Fourier Transform Infrared Spectroscopy (FTIR), FE-SEM, zeta potential measurement, and X-ray Diffraction (XRD). At optimization conditions, the optimum concentration of the BB-y was obtained at 200
... -
Chromium desalinization using novel chitosan functionalized iron oxide- biochar composites: Analysis, synthesis, characterization and adsorption perfo...
29/03/2024In the study, chitosan functionalized iron oxide incorporated with peanut shell biomass was prepared for potential adsorption of chromium (VI) from an aqueous media. The prepared material was characterized by modern spectroscopic methods for confirming the successful embedding. The adsorption experiments were conducted in batch systems. The experimental data showed robust removal of chromium supported by kinetic and equilibrium studies. The sorption data exhibited a strong agreement with the pseudo-second-order kinetics model, further confirming conformity with the Langmuir isotherm
... -
Determine methylene blue based on carbon paste electrode modified with nanoparticles of nickel oxide-nitrogen carbon quantum dots and carbon structure...
30/03/2024This paper deals with an electrochemical method for the determination of methylene blue (MB) by fabrication of an electrode based on a carbon paste modified with nano-nickel oxide and nitrogen carbon quantum dots (NiO-NCQD), graphene-carbon nitride (g-C3N4), reduced graphene oxide (rGO), and graphite powder and paraffin oil are as a plasticizer. This electrode is used as a working electrode. The analytical method used is cyclic voltammetry (CV), The oxidation-reduction curve of methylene blue was shown using this electrode. It is a quasi-reversible curve, and
... -
Analysis, construction, characterization, and application of copper nanowires loaded on activated carbon for removal of bromophenol blue in water samp...
28/03/2024In the present work, a copper nanowire loaded on activated carbon (Cu-NW-AC) was fabricated and applied as an effective adsorbent for the removal of bromophenol blue (BPB) dye from aqueous solutions and then the percentage of removal was evaluated by UV–Vis spectrophotometer. The synthesized adsorbent was characterized and identified using techniques like Transmission electron microscopy (TEM) and Brunauer–Emmett–Teller (BET). The effective parameters of the removal process were investigated and optimized by experimental design methodology (EDM) based on response surface methodology (RSM)
... -
A review: Exploratory analysis of recent advancement in green analytical chemistry application
30/03/2024It is always a concern to ensure personnel and environment safety in the field of chemistry which has caused to development of green analytical chemistry methods. Green chemistry aims to create an eco-friendly environment in laboratories by using various analytical methods/strategies to reduce the use of toxic solvents which are harmful to humans and the environment. It is a way that protect the environment by using green solvents and methods. Green analytical chemistry is a rapid analytical technique that describes the separation, identification, and quantification of an analyte in
... -
the Determination and evaluation of trace elements in the blood of radiography workers using graphite furnace atomic absorption spectrometry
30/03/2024This study aimed to evaluate the potentially toxic effects of trace elements in the blood of Iraqi medical radiography workers by analyzing them through GF-AAS. The study involved 50 male blood radiography workers from the medical imaging field at Al-Shatrah General Hospital in Thi-Qar City, Iraq. All workers were aged between 35-50 years and had worked for less than 10 years. The study compared these workers with 50 healthy men. The study found a significant increase in the levels of Cu, Pb, Cd, and Ca among radiography workers compared to the healthy control group, while Zn and Se
... -
Analytical Method: Determination of famotidine drug using chemiluminescence method
28/03/2024This study involved the development of a novel, cost-effective, fast, and highly sensitive analytical technique for quantifying minimal amounts of the drug famotidine through chemiluminescence. The method is centred around the measurement of energy emitted as a result of the interaction between the drug and Luminol in an alkaline solution; this interaction generates an electronically excited intermediate state, releasing a portion of the system’s energy as photons. The method was sensitive for the analysis of famotidine. The linear calibration curve (LR) is obtained in the range 2-12 mg
... -
Solid phase-fabrication of multi-walled carbon nanotubes and their derivatives for efficient extraction and analysis of Bismarck Brown-Y Dye from aque...
29/03/2024This investigation used efficientMWCNTs and their derivatives; MWCNT-Tris, MWCNT-H, MWCNT-Tetra and MWCNT-G, for extraction and removing the Bismarck Brown-Y (BB-Y) by solid phase extraction (SPE). The concentration of BB-Y was measured by UV-Vis spectrophotometer after the SPE technique. The solid phases were analyzed and characterized by utilizing several techniques, including Fourier Transform Infrared Spectroscopy (FTIR), FE-SEM, zeta potential measurement, and X-ray Diffraction (XRD). At optimization conditions, the optimum concentration of the BB-y was obtained at 200
... -
Chromium desalinization using novel chitosan functionalized iron oxide- biochar composites: Analysis, synthesis, characterization and adsorption perfo...
29/03/2024In the study, chitosan functionalized iron oxide incorporated with peanut shell biomass was prepared for potential adsorption of chromium (VI) from an aqueous media. The prepared material was characterized by modern spectroscopic methods for confirming the successful embedding. The adsorption experiments were conducted in batch systems. The experimental data showed robust removal of chromium supported by kinetic and equilibrium studies. The sorption data exhibited a strong agreement with the pseudo-second-order kinetics model, further confirming conformity with the Langmuir isotherm
... -
Determine methylene blue based on carbon paste electrode modified with nanoparticles of nickel oxide-nitrogen carbon quantum dots and carbon structure...
30/03/2024This paper deals with an electrochemical method for the determination of methylene blue (MB) by fabrication of an electrode based on a carbon paste modified with nano-nickel oxide and nitrogen carbon quantum dots (NiO-NCQD), graphene-carbon nitride (g-C3N4), reduced graphene oxide (rGO), and graphite powder and paraffin oil are as a plasticizer. This electrode is used as a working electrode. The analytical method used is cyclic voltammetry (CV), The oxidation-reduction curve of methylene blue was shown using this electrode. It is a quasi-reversible curve, and
... -
Analysis, construction, characterization, and application of copper nanowires loaded on activated carbon for removal of bromophenol blue in water samp...
28/03/2024In the present work, a copper nanowire loaded on activated carbon (Cu-NW-AC) was fabricated and applied as an effective adsorbent for the removal of bromophenol blue (BPB) dye from aqueous solutions and then the percentage of removal was evaluated by UV–Vis spectrophotometer. The synthesized adsorbent was characterized and identified using techniques like Transmission electron microscopy (TEM) and Brunauer–Emmett–Teller (BET). The effective parameters of the removal process were investigated and optimized by experimental design methodology (EDM) based on response surface methodology (RSM)
...